Conveyors - Pack-out Lines - Slicers - Conditioning Cylinders - Weigh Conveyor - Steaming Tunnels - Sweep Feed - Flow Proportioning - Feeders - Sieving/Desanding - Threshing Systems - Threshers - Counterflow Separators - SWAN/MODSWAN - Silos - QC Test Shaker - QC Stem Tester - Maker Feed - Rotadrum - Rotary Feeder - Discharger - Group Dust - Vacuum Cleaning - Odour Control - Modular Scrubber - Biofilter - Plasmacat

Counterflow Separator

The CounterFlow Separator is a well established separator and perhaps most widely used throughout the threshing industry.

The CounterFlow Classifier is a A Closed Loop separator comprising three sections; bottom chamber, separation chamber and tower or hood section.

The bottom chamber is designed to direct air flow for optimum separation. Air direction can be adjusted by external handles which allow for instant change without stopping production. Two access doors give easy entrance to the bottom chamber.

The separation chamber is designed to ensure a smooth flow of product entering the unit. Air enters the separation chamber through perforated slats on the apron band. The apron chains are mounted and protected for longer life. A counter rotor is located in the chamber to provide a second pass of lamina through the separation flow. Access doors are located at each side of the chamber.

The tower or hood section allows maximum separation. It is equipped with interior lights for operator visibility.