Conveyors - Pack-out Lines - Slicers - Conditioning Cylinders - Weigh Conveyor - Steaming Tunnels - Sweep Feed - Flow Proportioning - Feeders - Sieving/Desanding - Threshing Systems - Threshers - Counterflow Separators - SWAN/MODSWAN - Silos - QC Test Shaker - QC Stem Tester - Maker Feed - Rotadrum - Rotary Feeder - Discharger - Group Dust - Vacuum Cleaning - Odour Control - Modular Scrubber - Biofilter - Plasmacat

Threshers
 

Features:

• Variable speed drive
• Adjustable tooth spacing
• Variety of basket sizes

The Griffin Thresher is designed to efficiently strip lamina from stem when processing conditioned leaf or "butts". Individual machine configurations vary depending on application.
Hinge rod pivoted front and rear doors provide access to a central rotor which is mounted on plummer block bearings and support from the main case. Adjustable position, stationary comb teeth are located within the base of each door secured in upper and lower machined grooves with central tie rods.
Product entry is through the top inlet, passing through the thresher and basket to the lower exit aperture of the case.
The thresher baskets are interchangeable and are located in the thresher by means of guides, and are clamped in position by both doors when closed.
The rotor is driven via an asymmetric belt from a variable speed drive.
Threshers are fully guarded with door interlock switches for safety and a support stand to suit application.